Air cleaning prevents the spread of
The answer to the most frequently asked questions can be found here:
Our 6-stage filtration
Feel free to contact us!
What makes AIR8 air cleaners so good?
One HEPA filter is not like another
HEPA is an abbreviation for high-efficiency particulate air and stands for air filters that capture between at least 85% of all dust particles of 0.3 micrometer (µm). Particles smaller than 0.3 µm are also captured better than the indicated percentage, but that is a very technical story. It is important to know that there are different classes of HEPA filters.
HEPA filter classes
|HEPA class||Retention (total)|
AIR8 air purifiers use HEPA H13 filters which is exceptionally high compared to many other air treatment systems.
These situations call for a higher air cleaning factor
Feel free to contact us!
Smart combi deal: AIR8 260i NANO air purifier + AIR8 Guard Edge air quality meterexcluding VAT and shipping costsAdd to basket
The importance of clean air
The air in an office or classroom can easily contain five times as many harmful substances as the air outside. Adequate ventilation is therefore important. But when it's cold outside, the windows often stay closed. In addition, the outside air dilutes the amount of harmful and undesirable substances in the inside air, but does not remove them.
With the increased attention for pollen allergy, the harmful effects of particulate matter and the spread of germs such as the coronavirus via aerosols, there is a lot of interest in air cleaning in commercial buildings, offices, restaurants, treatment centres and schools. The high costs of a central air treatment system are often a problem. However, there is a much simpler, cheaper and more effective solution in the form of mobile air cleaners.
Modern air cleaners remove more than 99.9 percent of polluting and disease-causing particles from indoor air and render them harmless. Technological developments have led to equipment that requires a limited investment, requires little maintenance and can be used plug & play immediately for optimum air purification.
Optimal air cleaning in 6 steps
Interest-free lease option and worry-free maintenance
Are you considering the purchase of a large number of devices, but the investment amount is holding you back? We offer you an interest-free lease option!
We can also take care of the maintenance for you. This in itself is a simple operation with our complete filter packages, but we can also come by to do it for you and check the air cleaners again.
For more information you can contact our advisors.
This is how you calculate the required air cleaning capacity
In order to determine which capacity air cleaner(s) you need, in addition to the volume of the room, Air Changes per Hour (ACH) is also important. The number of times per hour that the air in the room must be filtered and decontaminated depends on the average number of people in the room and any circumstances where there is extra pollution. For example, dental practices where there is an above-average amount of aerosols (very small water droplets) floating around. More exceptions can be found in the left column.
In most cases you can work with an ACH of 4, as advised by Harvard Healthy Buildings (authority in the US) and the World Health Organization WHO. The calculated capacity with this is usually above the standard for Buildings Decree 2012 and the ARBO standard, because these allow the occupancy rate in a space to be determined. However, this has the risk that, with relatively few people in a room, not all the air will be drawn in by the air cleaner, creating blind spots where the air circulates insufficiently.
You multiply the ACH of 4 by the volume of the room in cubic feet and that gives you the required air cleaning capacity.
Air cleaning capacity AIR8 models
For our models, this means the following:
26oi NANO - capacity = 260 m3/hour - divided by 4 this means it is suitable for a space up to 65 m3. With a standard ceiling height of 2,5 meter this means a floor area of 26 m2 (for example 4 x 6,5 meter).
280 NANO - capacity = 280 m3/hour - divided by 4 this means it is suitable for a room up to 70 m3. With a standard ceiling height of 2.5 metres, this means a floor area of 28 m2 (e.g. 4 x 7 or 5 x 5.5 metres).
720i EDGE - capacity = 720 m3/hour - divided by 4 this means it is suitable for a space up to 180 m3. With a standard ceiling height of 2.5 metres, this means a floor area of 72 m2 (e.g. 8 x 9 metres). This model has no UV disinfection, but does have the high filtration rate of 99.97%.
1200i PRO - capacity = 1200 m3/hour - divided by 4 this means suitable for a space up to 300 m3. With a standard ceiling height of 2.5 metres, this means a floor area of 120 m2 (e.g. 10 x 12 or 6 x 20 metres).